2 - Fix to ensure SCSI phase bits are set atomically.
3 - Always return the requested number of bytes for a REQUEST SENSE command
4 This is required to support the Ensoniq ASR-10.
5 - Decreased (unused) heap and stack sizes to prepare for a memory
9 - Fix to SCSI Reset handling to avoid lockups
10 - Bug fixes to improve standards compatibility
11 - Bug fix for Unit Attention Condition, which is now enabled by default.
12 scsi2sd-config can be used to disable it for those systems that
13 truely require it (eg. Mac Plus).
14 - Added Linked commands support.
15 - Added support for configurable sector sizes between 64 and 2048 bytes.
16 The sector size can be set via the MODE SELECT command using a SCSI
17 format utility, or via scsi2sd-config
18 - Powerbook firmware added
21 - Remove hacks around ATN handling, and implement proper select-with-atn
22 support. This fix is essential for communicating with some SCSI hosts.
23 All SCSI2SD users are urged to upgrade to this firmware version.
24 - More fixes to support Apple HD SC Setup (thanks to Doug Brown!)
25 - Fixes to support SCSI1 initiators
26 * Support non-arbitrating initiators.
27 * Support single-initiator option.
28 * Set CCS response format flag in INQUIRY response.
31 - Fixes for better SCSI reset handling
32 - Fix for reading the last sector of the SD card.
33 - Performance improvements. 2.5x read, 2x write performance.
37 - Fixes to support formatting with Apple HD SC Setup. This is very slow,
38 Apple Drive Setup is preferred
39 - Reliability improvement for rejecting unknown SCSI messages.
40 - Reliability improvements for SD card initialisation and reading.
44 - Initial public release.