software/SCSI2SD/v3/SCSI2SD.cydsn/SCSI2SD.svd

   1 <?xml version="1.0" encoding="utf-8"?>\r
   2 <device schemaVersion="1.0" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_0.xsd">\r
   3   <name>CY8C5267AXI_LP051</name>\r
   4   <version>0.1</version>\r
   5   <description>CY8C52LP</description>\r
   6   <addressUnitBits>8</addressUnitBits>\r
   7   <width>32</width>\r
   8   <peripherals>\r
   9     <peripheral>\r
  10       <name>SCSI_Out_Bits</name>\r
  11       <description>No description available</description>\r
  12       <baseAddress>0x4000647B</baseAddress>\r
  13       <addressBlock>\r
  14         <offset>0</offset>\r
  15         <size>0x0</size>\r
  16         <usage>registers</usage>\r
  17       </addressBlock>\r
  18       <registers>\r
  19         <register>\r
  20           <name>SCSI_Out_Bits_CONTROL_REG</name>\r
  21           <description>No description available</description>\r
  22           <addressOffset>0x0</addressOffset>\r
  23           <size>8</size>\r
  24           <access>read-write</access>\r
  25           <resetValue>0</resetValue>\r
  26           <resetMask>0</resetMask>\r
  27         </register>\r
  28       </registers>\r
  29     </peripheral>\r
  30     <peripheral>\r
  31       <name>SCSI_Out_Ctl</name>\r
  32       <description>No description available</description>\r
  33       <baseAddress>0x4000647D</baseAddress>\r
  34       <addressBlock>\r
  35         <offset>0</offset>\r
  36         <size>0x0</size>\r
  37         <usage>registers</usage>\r
  38       </addressBlock>\r
  39       <registers>\r
  40         <register>\r
  41           <name>SCSI_Out_Ctl_CONTROL_REG</name>\r
  42           <description>No description available</description>\r
  43           <addressOffset>0x0</addressOffset>\r
  44           <size>8</size>\r
  45           <access>read-write</access>\r
  46           <resetValue>0</resetValue>\r
  47           <resetMask>0</resetMask>\r
  48         </register>\r
  49       </registers>\r
  50     </peripheral>\r
  51     <peripheral>\r
  52       <name>Debug_Timer</name>\r
  53       <description>No description available</description>\r
  54       <baseAddress>0x0</baseAddress>\r
  55       <addressBlock>\r
  56         <offset>0</offset>\r
  57         <size>0x0</size>\r
  58         <usage>registers</usage>\r
  59       </addressBlock>\r
  60       <registers>\r
  61         <register>\r
  62           <name>Debug_Timer_GLOBAL_ENABLE</name>\r
  63           <description>PM.ACT.CFG</description>\r
  64           <addressOffset>0x400043A3</addressOffset>\r
  65           <size>8</size>\r
  66           <access>read-write</access>\r
  67           <resetValue>0</resetValue>\r
  68           <resetMask>0</resetMask>\r
  69           <fields>\r
  70             <field>\r
  71               <name>en_timer</name>\r
  72               <description>Enable timer/counters.</description>\r
  73               <lsb>0</lsb>\r
  74               <msb>3</msb>\r
  75               <access>read-write</access>\r
  76             </field>\r
  77           </fields>\r
  78         </register>\r
  79         <register>\r
  80           <name>Debug_Timer_CONTROL</name>\r
  81           <description>TMRx.CFG0</description>\r
  82           <addressOffset>0x40004F00</addressOffset>\r
  83           <size>8</size>\r
  84           <access>read-write</access>\r
  85           <resetValue>0</resetValue>\r
  86           <resetMask>0</resetMask>\r
  87           <fields>\r
  88             <field>\r
  89               <name>EN</name>\r
  90               <description>Enables timer/comparator.</description>\r
  91               <lsb>0</lsb>\r
  92               <msb>0</msb>\r
  93               <access>read-write</access>\r
  94             </field>\r
  95             <field>\r
  96               <name>MODE</name>\r
  97               <description>Mode. (0 = Timer; 1 = Comparator)</description>\r
  98               <lsb>1</lsb>\r
  99               <msb>1</msb>\r
 100               <access>read-write</access>\r
 101               <enumeratedValues>\r
 102                 <enumeratedValue>\r
 103                   <name>Timer</name>\r
 104                   <description>Timer mode. CNT/CMP register holds timer count value.</description>\r
 105                   <value>0</value>\r
 106                 </enumeratedValue>\r
 107                 <enumeratedValue>\r
 108                   <name>Comparator</name>\r
 109                   <description>Comparator mode. CNT/CMP register holds comparator threshold value.</description>\r
 110                   <value>1</value>\r
 111                 </enumeratedValue>\r
 112               </enumeratedValues>\r
 113             </field>\r
 114             <field>\r
 115               <name>ONESHOT</name>\r
 116               <description>Timer stops upon reaching stop condition defined by TMR_CFG bits. Can be restarted by asserting TIMER RESET or disabling and re-enabling block.</description>\r
 117               <lsb>2</lsb>\r
 118               <msb>2</msb>\r
 119               <access>read-write</access>\r
 120             </field>\r
 121             <field>\r
 122               <name>CMP_BUFF</name>\r
 123               <description>Buffer compare register. Compare register updates only on timer terminal count.</description>\r
 124               <lsb>3</lsb>\r
 125               <msb>3</msb>\r
 126               <access>read-write</access>\r
 127             </field>\r
 128             <field>\r
 129               <name>INV</name>\r
 130               <description>Invert sense of TIMEREN signal</description>\r
 131               <lsb>4</lsb>\r
 132               <msb>4</msb>\r
 133               <access>read-write</access>\r
 134             </field>\r
 135             <field>\r
 136               <name>DB</name>\r
 137               <description>Deadband mode--Deadband phases phi1 and phi2 are outputted on CMP and TC output pins respectively.</description>\r
 138               <lsb>5</lsb>\r
 139               <msb>5</msb>\r
 140               <access>read-write</access>\r
 141               <enumeratedValues>\r
 142                 <enumeratedValue>\r
 143                   <name>Timer</name>\r
 144                   <description>CMP and TC are output.</description>\r
 145                   <value>0</value>\r
 146                 </enumeratedValue>\r
 147                 <enumeratedValue>\r
 148                   <name>Deadband</name>\r
 149                   <description>PHI1 (instead of CMP) and PHI2 (instead of TC) are output.</description>\r
 150                   <value>1</value>\r
 151                 </enumeratedValue>\r
 152               </enumeratedValues>\r
 153             </field>\r
 154             <field>\r
 155               <name>DEADBAND_PERIOD</name>\r
 156               <description>Deadband Period</description>\r
 157               <lsb>6</lsb>\r
 158               <msb>7</msb>\r
 159               <access>read-write</access>\r
 160             </field>\r
 161           </fields>\r
 162         </register>\r
 163         <register>\r
 164           <name>Debug_Timer_CONTROL2</name>\r
 165           <description>TMRx.CFG1</description>\r
 166           <addressOffset>0x40004F01</addressOffset>\r
 167           <size>8</size>\r
 168           <access>read-write</access>\r
 169           <resetValue>0</resetValue>\r
 170           <resetMask>0</resetMask>\r
 171           <fields>\r
 172             <field>\r
 173               <name>IRQ_SEL</name>\r
 174               <description>Irq selection. (0 = raw interrupts; 1 = status register interrupts)</description>\r
 175               <lsb>0</lsb>\r
 176               <msb>0</msb>\r
 177               <access>read-write</access>\r
 178             </field>\r
 179             <field>\r
 180               <name>FTC</name>\r
 181               <description>First Terminal Count (FTC). Setting this bit forces a single pulse on the TC pin when first enabled.</description>\r
 182               <lsb>1</lsb>\r
 183               <msb>1</msb>\r
 184               <access>read-write</access>\r
 185               <enumeratedValues>\r
 186                 <enumeratedValue>\r
 187                   <name>Disable_FTC</name>\r
 188                   <description>Disable the single cycle pulse, which signifies the timer is starting.</description>\r
 189                   <value>0</value>\r
 190                 </enumeratedValue>\r
 191                 <enumeratedValue>\r
 192                   <name>Enable_FTC</name>\r
 193                   <description>Enable the single cycle pulse, which signifies the timer is starting.</description>\r
 194                   <value>1</value>\r
 195                 </enumeratedValue>\r
 196               </enumeratedValues>\r
 197             </field>\r
 198             <field>\r
 199               <name>DCOR</name>\r
 200               <description>Disable Clear on Read (DCOR) of Status Register SR0.</description>\r
 201               <lsb>2</lsb>\r
 202               <msb>2</msb>\r
 203               <access>read-write</access>\r
 204             </field>\r
 205             <field>\r
 206               <name>DBMODE</name>\r
 207               <description>Deadband mode (asynchronous/synchronous). CMP output pin is also affected when not in deadband mode (CFG0.DEADBAND).</description>\r
 208               <lsb>3</lsb>\r
 209               <msb>3</msb>\r
 210               <access>read-write</access>\r
 211             </field>\r
 212             <field>\r
 213               <name>CLK_BUS_EN_SEL</name>\r
 214               <description>Digital Global Clock selection.</description>\r
 215               <lsb>4</lsb>\r
 216               <msb>6</msb>\r
 217               <access>read-write</access>\r
 218             </field>\r
 219             <field>\r
 220               <name>BUS_CLK_SEL</name>\r
 221               <description>Bus Clock selection.</description>\r
 222               <lsb>7</lsb>\r
 223               <msb>7</msb>\r
 224               <access>read-write</access>\r
 225             </field>\r
 226           </fields>\r
 227         </register>\r
 228         <register>\r
 229           <name>Debug_Timer_CONTROL3_</name>\r
 230           <description>TMRx.CFG2</description>\r
 231           <addressOffset>0x40004F02</addressOffset>\r
 232           <size>8</size>\r
 233           <access>read-write</access>\r
 234           <resetValue>0</resetValue>\r
 235           <resetMask>0</resetMask>\r
 236           <fields>\r
 237             <field>\r
 238               <name>TMR_CFG</name>\r
 239               <description>Timer configuration (MODE = 0): 000 = Continuous; 001 = Pulsewidth; 010 = Period; 011 = Stop on IRQ</description>\r
 240               <lsb>0</lsb>\r
 241               <msb>1</msb>\r
 242               <access>read-write</access>\r
 243               <enumeratedValues>\r
 244                 <enumeratedValue>\r
 245                   <name>Continuous</name>\r
 246                   <description>Timer runs while EN bit of CFG0 register is set to '1'.</description>\r
 247                   <value>0</value>\r
 248                 </enumeratedValue>\r
 249                 <enumeratedValue>\r
 250                   <name>Pulsewidth</name>\r
 251                   <description>Timer runs from positive to negative edge of TIMEREN.</description>\r
 252                   <value>1</value>\r
 253                 </enumeratedValue>\r
 254                 <enumeratedValue>\r
 255                   <name>Period</name>\r
 256                   <description>Timer runs from positive to positive edge of TIMEREN.</description>\r
 257                   <value>2</value>\r
 258                 </enumeratedValue>\r
 259                 <enumeratedValue>\r
 260                   <name>Irq</name>\r
 261                   <description>Timer runs until IRQ.</description>\r
 262                   <value>3</value>\r
 263                 </enumeratedValue>\r
 264               </enumeratedValues>\r
 265             </field>\r
 266             <field>\r
 267               <name>COD</name>\r
 268               <description>Clear On Disable (COD). Clears or gates outputs to zero.</description>\r
 269               <lsb>2</lsb>\r
 270               <msb>2</msb>\r
 271               <access>read-write</access>\r
 272             </field>\r
 273             <field>\r
 274               <name>ROD</name>\r
 275               <description>Reset On Disable (ROD). Resets internal state of output logic</description>\r
 276               <lsb>3</lsb>\r
 277               <msb>3</msb>\r
 278               <access>read-write</access>\r
 279             </field>\r
 280             <field>\r
 281               <name>CMP_CFG</name>\r
 282               <description>Comparator configurations</description>\r
 283               <lsb>4</lsb>\r
 284               <msb>6</msb>\r
 285               <access>read-write</access>\r
 286               <enumeratedValues>\r
 287                 <enumeratedValue>\r
 288                   <name>Equal</name>\r
 289                   <description>Compare Equal </description>\r
 290                   <value>0</value>\r
 291                 </enumeratedValue>\r
 292                 <enumeratedValue>\r
 293                   <name>Less_than</name>\r
 294                   <description>Compare Less Than </description>\r
 295                   <value>1</value>\r
 296                 </enumeratedValue>\r
 297                 <enumeratedValue>\r
 298                   <name>Less_than_or_equal</name>\r
 299                   <description>Compare Less Than or Equal .</description>\r
 300                   <value>2</value>\r
 301                 </enumeratedValue>\r
 302                 <enumeratedValue>\r
 303                   <name>Greater</name>\r
 304                   <description>Compare Greater Than .</description>\r
 305                   <value>3</value>\r
 306                 </enumeratedValue>\r
 307                 <enumeratedValue>\r
 308                   <name>Greater_than_or_equal</name>\r
 309                   <description>Compare Greater Than or Equal </description>\r
 310                   <value>4</value>\r
 311                 </enumeratedValue>\r
 312               </enumeratedValues>\r
 313             </field>\r
 314             <field>\r
 315               <name>HW_EN</name>\r
 316               <description>When set Timer Enable controls counting.</description>\r
 317               <lsb>7</lsb>\r
 318               <msb>7</msb>\r
 319               <access>read-write</access>\r
 320             </field>\r
 321           </fields>\r
 322         </register>\r
 323         <register>\r
 324           <name>Debug_Timer_PERIOD</name>\r
 325           <description>TMRx.PER0 - Assigned Period</description>\r
 326           <addressOffset>0x40004F04</addressOffset>\r
 327           <size>16</size>\r
 328           <access>read-write</access>\r
 329           <resetValue>0</resetValue>\r
 330           <resetMask>0</resetMask>\r
 331         </register>\r
 332         <register>\r
 333           <name>Debug_Timer_COUNTER</name>\r
 334           <description>TMRx.CNT_CMP0 - Current Down Counter Value</description>\r
 335           <addressOffset>0x40004F06</addressOffset>\r
 336           <size>16</size>\r
 337           <access>read-write</access>\r
 338           <resetValue>0</resetValue>\r
 339           <resetMask>0</resetMask>\r
 340         </register>\r
 341       </registers>\r
 342     </peripheral>\r
 343     <peripheral>\r
 344       <name>SCSI_Filtered</name>\r
 345       <description>No description available</description>\r
 346       <baseAddress>0x4000646C</baseAddress>\r
 347       <addressBlock>\r
 348         <offset>0</offset>\r
 349         <size>0x0</size>\r
 350         <usage>registers</usage>\r
 351       </addressBlock>\r
 352       <registers>\r
 353         <register>\r
 354           <name>SCSI_Filtered_STATUS_REG</name>\r
 355           <description>No description available</description>\r
 356           <addressOffset>0x0</addressOffset>\r
 357           <size>8</size>\r
 358           <access>read-write</access>\r
 359           <resetValue>0</resetValue>\r
 360           <resetMask>0</resetMask>\r
 361         </register>\r
 362         <register>\r
 363           <name>SCSI_Filtered_MASK_REG</name>\r
 364           <description>No description available</description>\r
 365           <addressOffset>0x20</addressOffset>\r
 366           <size>8</size>\r
 367           <access>read-write</access>\r
 368           <resetValue>0</resetValue>\r
 369           <resetMask>0</resetMask>\r
 370         </register>\r
 371         <register>\r
 372           <name>SCSI_Filtered_STATUS_AUX_CTL_REG</name>\r
 373           <description>No description available</description>\r
 374           <addressOffset>0x30</addressOffset>\r
 375           <size>8</size>\r
 376           <access>read-write</access>\r
 377           <resetValue>0</resetValue>\r
 378           <resetMask>0</resetMask>\r
 379           <fields>\r
 380             <field>\r
 381               <name>FIFO0</name>\r
 382               <description>FIFO0 clear</description>\r
 383               <lsb>5</lsb>\r
 384               <msb>5</msb>\r
 385               <access>read-write</access>\r
 386               <enumeratedValues>\r
 387                 <enumeratedValue>\r
 388                   <name>ENABLED</name>\r
 389                   <description>Enable counter</description>\r
 390                   <value>1</value>\r
 391                 </enumeratedValue>\r
 392                 <enumeratedValue>\r
 393                   <name>DISABLED</name>\r
 394                   <description>Disable counter</description>\r
 395                   <value>0</value>\r
 396                 </enumeratedValue>\r
 397               </enumeratedValues>\r
 398             </field>\r
 399             <field>\r
 400               <name>INTRENBL</name>\r
 401               <description>Enables or disables the Interrupt</description>\r
 402               <lsb>4</lsb>\r
 403               <msb>4</msb>\r
 404               <access>read-write</access>\r
 405               <enumeratedValues>\r
 406                 <enumeratedValue>\r
 407                   <name>ENABLED</name>\r
 408                   <description>Interrupt enabled</description>\r
 409                   <value>1</value>\r
 410                 </enumeratedValue>\r
 411                 <enumeratedValue>\r
 412                   <name>DISABLED</name>\r
 413                   <description>Interrupt disabled</description>\r
 414                   <value>0</value>\r
 415                 </enumeratedValue>\r
 416               </enumeratedValues>\r
 417             </field>\r
 418             <field>\r
 419               <name>FIFO1LEVEL</name>\r
 420               <description>FIFO level</description>\r
 421               <lsb>3</lsb>\r
 422               <msb>3</msb>\r
 423               <access>read-write</access>\r
 424               <enumeratedValues>\r
 425                 <enumeratedValue>\r
 426                   <name>ENABLED</name>\r
 427                   <description>FIFO LVL: input mode: FIFO at least 1/2 empty; output mode: FIFO at least 1/2 full</description>\r
 428                   <value>1</value>\r
 429                 </enumeratedValue>\r
 430                 <enumeratedValue>\r
 431                   <name>DISABLED</name>\r
 432                   <description>FIFO LVL: input mode: FIFO not full; output mode: FIFO not empty</description>\r
 433                   <value>0</value>\r
 434                 </enumeratedValue>\r
 435               </enumeratedValues>\r
 436             </field>\r
 437             <field>\r
 438               <name>FIFO0LEVEL</name>\r
 439               <description>FIFO level</description>\r
 440               <lsb>2</lsb>\r
 441               <msb>2</msb>\r
 442               <access>read-write</access>\r
 443               <enumeratedValues>\r
 444                 <enumeratedValue>\r
 445                   <name>ENABLED</name>\r
 446                   <description>FIFO LVL: input mode: FIFO at least 1/2 empty; output mode: FIFO at least 1/2 full</description>\r
 447                   <value>1</value>\r
 448                 </enumeratedValue>\r
 449                 <enumeratedValue>\r
 450                   <name>DISABLED</name>\r
 451                   <description>FIFO LVL: input mode: FIFO not full; output mode: FIFO not empty</description>\r
 452                   <value>0</value>\r
 453                 </enumeratedValue>\r
 454               </enumeratedValues>\r
 455             </field>\r
 456             <field>\r
 457               <name>FIFO1CLEAR</name>\r
 458               <description>FIFO clear</description>\r
 459               <lsb>1</lsb>\r
 460               <msb>1</msb>\r
 461               <access>read-write</access>\r
 462               <enumeratedValues>\r
 463                 <enumeratedValue>\r
 464                   <name>ENABLED</name>\r
 465                   <description>Clear FIFO state</description>\r
 466                   <value>1</value>\r
 467                 </enumeratedValue>\r
 468                 <enumeratedValue>\r
 469                   <name>DISABLED</name>\r
 470                   <description>Normal FIFO operation</description>\r
 471                   <value>0</value>\r
 472                 </enumeratedValue>\r
 473               </enumeratedValues>\r
 474             </field>\r
 475             <field>\r
 476               <name>FIFO0CLEAR</name>\r
 477               <description>FIFO clear</description>\r
 478               <lsb>0</lsb>\r
 479               <msb>0</msb>\r
 480               <access>read-write</access>\r
 481               <enumeratedValues>\r
 482                 <enumeratedValue>\r
 483                   <name>ENABLED</name>\r
 484                   <description>Clear FIFO state</description>\r
 485                   <value>1</value>\r
 486                 </enumeratedValue>\r
 487                 <enumeratedValue>\r
 488                   <name>DISABLED</name>\r
 489                   <description>Normal FIFO operation</description>\r
 490                   <value>0</value>\r
 491                 </enumeratedValue>\r
 492               </enumeratedValues>\r
 493             </field>\r
 494           </fields>\r
 495         </register>\r
 496       </registers>\r
 497     </peripheral>\r
 498     <peripheral>\r
 499       <name>SCSI_Parity_Error</name>\r
 500       <description>No description available</description>\r
 501       <baseAddress>0x40006466</baseAddress>\r
 502       <addressBlock>\r
 503         <offset>0</offset>\r
 504         <size>0x0</size>\r
 505         <usage>registers</usage>\r
 506       </addressBlock>\r
 507       <registers>\r
 508         <register>\r
 509           <name>SCSI_Parity_Error_STATUS_REG</name>\r
 510           <description>No description available</description>\r
 511           <addressOffset>0x0</addressOffset>\r
 512           <size>8</size>\r
 513           <access>read-write</access>\r
 514           <resetValue>0</resetValue>\r
 515           <resetMask>0</resetMask>\r
 516         </register>\r
 517         <register>\r
 518           <name>SCSI_Parity_Error_MASK_REG</name>\r
 519           <description>No description available</description>\r
 520           <addressOffset>0x20</addressOffset>\r
 521           <size>8</size>\r
 522           <access>read-write</access>\r
 523           <resetValue>0</resetValue>\r
 524           <resetMask>0</resetMask>\r
 525         </register>\r
 526         <register>\r
 527           <name>SCSI_Parity_Error_STATUS_AUX_CTL_REG</name>\r
 528           <description>No description available</description>\r
 529           <addressOffset>0x30</addressOffset>\r
 530           <size>8</size>\r
 531           <access>read-write</access>\r
 532           <resetValue>0</resetValue>\r
 533           <resetMask>0</resetMask>\r
 534           <fields>\r
 535             <field>\r
 536               <name>FIFO0</name>\r
 537               <description>FIFO0 clear</description>\r
 538               <lsb>5</lsb>\r
 539               <msb>5</msb>\r
 540               <access>read-write</access>\r
 541               <enumeratedValues>\r
 542                 <enumeratedValue>\r
 543                   <name>ENABLED</name>\r
 544                   <description>Enable counter</description>\r
 545                   <value>1</value>\r
 546                 </enumeratedValue>\r
 547                 <enumeratedValue>\r
 548                   <name>DISABLED</name>\r
 549                   <description>Disable counter</description>\r
 550                   <value>0</value>\r
 551                 </enumeratedValue>\r
 552               </enumeratedValues>\r
 553             </field>\r
 554             <field>\r
 555               <name>INTRENBL</name>\r
 556               <description>Enables or disables the Interrupt</description>\r
 557               <lsb>4</lsb>\r
 558               <msb>4</msb>\r
 559               <access>read-write</access>\r
 560               <enumeratedValues>\r
 561                 <enumeratedValue>\r
 562                   <name>ENABLED</name>\r
 563                   <description>Interrupt enabled</description>\r
 564                   <value>1</value>\r
 565                 </enumeratedValue>\r
 566                 <enumeratedValue>\r
 567                   <name>DISABLED</name>\r
 568                   <description>Interrupt disabled</description>\r
 569                   <value>0</value>\r
 570                 </enumeratedValue>\r
 571               </enumeratedValues>\r
 572             </field>\r
 573             <field>\r
 574               <name>FIFO1LEVEL</name>\r
 575               <description>FIFO level</description>\r
 576               <lsb>3</lsb>\r
 577               <msb>3</msb>\r
 578               <access>read-write</access>\r
 579               <enumeratedValues>\r
 580                 <enumeratedValue>\r
 581                   <name>ENABLED</name>\r
 582                   <description>FIFO LVL: input mode: FIFO at least 1/2 empty; output mode: FIFO at least 1/2 full</description>\r
 583                   <value>1</value>\r
 584                 </enumeratedValue>\r
 585                 <enumeratedValue>\r
 586                   <name>DISABLED</name>\r
 587                   <description>FIFO LVL: input mode: FIFO not full; output mode: FIFO not empty</description>\r
 588                   <value>0</value>\r
 589                 </enumeratedValue>\r
 590               </enumeratedValues>\r
 591             </field>\r
 592             <field>\r
 593               <name>FIFO0LEVEL</name>\r
 594               <description>FIFO level</description>\r
 595               <lsb>2</lsb>\r
 596               <msb>2</msb>\r
 597               <access>read-write</access>\r
 598               <enumeratedValues>\r
 599                 <enumeratedValue>\r
 600                   <name>ENABLED</name>\r
 601                   <description>FIFO LVL: input mode: FIFO at least 1/2 empty; output mode: FIFO at least 1/2 full</description>\r
 602                   <value>1</value>\r
 603                 </enumeratedValue>\r
 604                 <enumeratedValue>\r
 605                   <name>DISABLED</name>\r
 606                   <description>FIFO LVL: input mode: FIFO not full; output mode: FIFO not empty</description>\r
 607                   <value>0</value>\r
 608                 </enumeratedValue>\r
 609               </enumeratedValues>\r
 610             </field>\r
 611             <field>\r
 612               <name>FIFO1CLEAR</name>\r
 613               <description>FIFO clear</description>\r
 614               <lsb>1</lsb>\r
 615               <msb>1</msb>\r
 616               <access>read-write</access>\r
 617               <enumeratedValues>\r
 618                 <enumeratedValue>\r
 619                   <name>ENABLED</name>\r
 620                   <description>Clear FIFO state</description>\r
 621                   <value>1</value>\r
 622                 </enumeratedValue>\r
 623                 <enumeratedValue>\r
 624                   <name>DISABLED</name>\r
 625                   <description>Normal FIFO operation</description>\r
 626                   <value>0</value>\r
 627                 </enumeratedValue>\r
 628               </enumeratedValues>\r
 629             </field>\r
 630             <field>\r
 631               <name>FIFO0CLEAR</name>\r
 632               <description>FIFO clear</description>\r
 633               <lsb>0</lsb>\r
 634               <msb>0</msb>\r
 635               <access>read-write</access>\r
 636               <enumeratedValues>\r
 637                 <enumeratedValue>\r
 638                   <name>ENABLED</name>\r
 639                   <description>Clear FIFO state</description>\r
 640                   <value>1</value>\r
 641                 </enumeratedValue>\r
 642                 <enumeratedValue>\r
 643                   <name>DISABLED</name>\r
 644                   <description>Normal FIFO operation</description>\r
 645                   <value>0</value>\r
 646                 </enumeratedValue>\r
 647               </enumeratedValues>\r
 648             </field>\r
 649           </fields>\r
 650         </register>\r
 651       </registers>\r
 652     </peripheral>\r
 653     <peripheral>\r
 654       <name>SCSI_CTL_PHASE</name>\r
 655       <description>No description available</description>\r
 656       <baseAddress>0x4000647C</baseAddress>\r
 657       <addressBlock>\r
 658         <offset>0</offset>\r
 659         <size>0x0</size>\r
 660         <usage>registers</usage>\r
 661       </addressBlock>\r
 662       <registers>\r
 663         <register>\r
 664           <name>SCSI_CTL_PHASE_CONTROL_REG</name>\r
 665           <description>No description available</description>\r
 666           <addressOffset>0x0</addressOffset>\r
 667           <size>8</size>\r
 668           <access>read-write</access>\r
 669           <resetValue>0</resetValue>\r
 670           <resetMask>0</resetMask>\r
 671         </register>\r
 672       </registers>\r
 673     </peripheral>\r
 674     <peripheral>\r
 675       <name>USBFS</name>\r
 676       <description>USBFS</description>\r
 677       <baseAddress>0x0</baseAddress>\r
 678       <addressBlock>\r
 679         <offset>0</offset>\r
 680         <size>0x0</size>\r
 681         <usage>registers</usage>\r
 682       </addressBlock>\r
 683       <registers>\r
 684         <register>\r
 685           <name>USBFS_PM_USB_CR0</name>\r
 686           <description>USB Power Mode Control Register 0</description>\r
 687           <addressOffset>0x40004394</addressOffset>\r
 688           <size>8</size>\r
 689           <access>read-write</access>\r
 690           <resetValue>0</resetValue>\r
 691           <resetMask>0</resetMask>\r
 692           <fields>\r
 693             <field>\r
 694               <name>fsusbio_ref_en</name>\r
 695               <description>No description available</description>\r
 696               <lsb>0</lsb>\r
 697               <msb>0</msb>\r
 698               <access>read-write</access>\r
 699             </field>\r
 700             <field>\r
 701               <name>fsusbio_pd_n</name>\r
 702               <description>No description available</description>\r
 703               <lsb>1</lsb>\r
 704               <msb>1</msb>\r
 705               <access>read-write</access>\r
 706             </field>\r
 707             <field>\r
 708               <name>fsusbio_pd_pullup_n</name>\r
 709               <description>No description available</description>\r
 710               <lsb>2</lsb>\r
 711               <msb>2</msb>\r
 712               <access>read-write</access>\r
 713             </field>\r
 714           </fields>\r
 715         </register>\r
 716         <register>\r
 717           <name>USBFS_PM_ACT_CFG</name>\r
 718           <description>Active Power Mode Configuration Register</description>\r
 719           <addressOffset>0x400043A5</addressOffset>\r
 720           <size>8</size>\r
 721           <access>read-write</access>\r
 722           <resetValue>0</resetValue>\r
 723           <resetMask>0</resetMask>\r
 724         </register>\r
 725         <register>\r
 726           <name>USBFS_PM_STBY_CFG</name>\r
 727           <description>Standby Power Mode Configuration Register</description>\r
 728           <addressOffset>0x400043B5</addressOffset>\r
 729           <size>8</size>\r
 730           <access>read-write</access>\r
 731           <resetValue>0</resetValue>\r
 732           <resetMask>0</resetMask>\r
 733         </register>\r
 734         <register>\r
 735           <name>USBFS_PRT_PS</name>\r
 736           <description>Port Pin State Register</description>\r
 737           <addressOffset>0x400051F1</addressOffset>\r
 738           <size>8</size>\r
 739           <access>read-write</access>\r
 740           <resetValue>0</resetValue>\r
 741           <resetMask>0</resetMask>\r
 742           <fields>\r
 743             <field>\r
 744               <name>PinState_DP</name>\r
 745               <description>No description available</description>\r
 746               <lsb>6</lsb>\r
 747               <msb>6</msb>\r
 748               <access>read-only</access>\r
 749             </field>\r
 750             <field>\r
 751               <name>PinState_DM</name>\r
 752               <description>No description available</description>\r
 753               <lsb>7</lsb>\r
 754               <msb>7</msb>\r
 755               <access>read-only</access>\r
 756             </field>\r
 757           </fields>\r
 758         </register>\r
 759         <register>\r
 760           <name>USBFS_PRT_DM0</name>\r
 761           <description>Port Drive Mode Register</description>\r
 762           <addressOffset>0x400051F2</addressOffset>\r
 763           <size>8</size>\r
 764           <access>read-write</access>\r
 765           <resetValue>0</resetValue>\r
 766           <resetMask>0</resetMask>\r
 767           <fields>\r
 768             <field>\r
 769               <name>DriveMode_DP</name>\r
 770               <description>No description available</description>\r
 771               <lsb>6</lsb>\r
 772               <msb>6</msb>\r
 773               <access>read-write</access>\r
 774             </field>\r
 775             <field>\r
 776               <name>DriveMode_DM</name>\r
 777               <description>No description available</description>\r
 778               <lsb>7</lsb>\r
 779               <msb>7</msb>\r
 780               <access>read-write</access>\r
 781             </field>\r
 782           </fields>\r
 783         </register>\r
 784         <register>\r
 785           <name>USBFS_PRT_DM1</name>\r
 786           <description>Port Drive Mode Register</description>\r
 787           <addressOffset>0x400051F3</addressOffset>\r
 788           <size>8</size>\r
 789           <access>read-write</access>\r
 790           <resetValue>0</resetValue>\r
 791           <resetMask>0</resetMask>\r
 792           <fields>\r
 793             <field>\r
 794               <name>PullUp_en_DP</name>\r
 795               <description>No description available</description>\r
 796               <lsb>6</lsb>\r
 797               <msb>6</msb>\r
 798               <access>read-write</access>\r
 799             </field>\r
 800             <field>\r
 801               <name>PullUp_en_DM</name>\r
 802               <description>No description available</description>\r
 803               <lsb>7</lsb>\r
 804               <msb>7</msb>\r
 805               <access>read-write</access>\r
 806             </field>\r
 807           </fields>\r
 808         </register>\r
 809         <register>\r
 810           <name>USBFS_PRT_INP_DIS</name>\r
 811           <description>Input buffer disable override</description>\r
 812           <addressOffset>0x400051F8</addressOffset>\r
 813           <size>8</size>\r
 814           <access>read-write</access>\r
 815           <resetValue>0</resetValue>\r
 816           <resetMask>0</resetMask>\r
 817           <fields>\r
 818             <field>\r
 819               <name>seinput_dis_dp</name>\r
 820               <description>No description available</description>\r
 821               <lsb>6</lsb>\r
 822               <msb>6</msb>\r
 823               <access>read-write</access>\r
 824             </field>\r
 825             <field>\r
 826               <name>seinput_dis_dm</name>\r
 827               <description>No description available</description>\r
 828               <lsb>7</lsb>\r
 829               <msb>7</msb>\r
 830               <access>read-write</access>\r
 831             </field>\r
 832           </fields>\r
 833         </register>\r
 834         <register>\r
 835           <name>USBFS_EP0_DR0</name>\r
 836           <description>bmRequestType</description>\r
 837           <addressOffset>0x40006000</addressOffset>\r
 838           <size>8</size>\r
 839           <access>read-write</access>\r
 840           <resetValue>0</resetValue>\r
 841           <resetMask>0</resetMask>\r
 842         </register>\r
 843         <register>\r
 844           <name>USBFS_EP0_DR1</name>\r
 845           <description>bRequest</description>\r
 846           <addressOffset>0x40006001</addressOffset>\r
 847           <size>8</size>\r
 848           <access>read-write</access>\r
 849           <resetValue>0</resetValue>\r
 850           <resetMask>0</resetMask>\r
 851         </register>\r
 852         <register>\r
 853           <name>USBFS_EP0_DR2</name>\r
 854           <description>wValueLo</description>\r
 855           <addressOffset>0x40006002</addressOffset>\r
 856           <size>8</size>\r
 857           <access>read-write</access>\r
 858           <resetValue>0</resetValue>\r
 859           <resetMask>0</resetMask>\r
 860         </register>\r
 861         <register>\r
 862           <name>USBFS_EP0_DR3</name>\r
 863           <description>wValueHi</description>\r
 864           <addressOffset>0x40006003</addressOffset>\r
 865           <size>8</size>\r
 866           <access>read-write</access>\r
 867           <resetValue>0</resetValue>\r
 868           <resetMask>0</resetMask>\r
 869         </register>\r
 870         <register>\r
 871           <name>USBFS_EP0_DR4</name>\r
 872           <description>wIndexLo</description>\r
 873           <addressOffset>0x40006004</addressOffset>\r
 874           <size>8</size>\r
 875           <access>read-write</access>\r
 876           <resetValue>0</resetValue>\r
 877           <resetMask>0</resetMask>\r
 878         </register>\r
 879         <register>\r
 880           <name>USBFS_EP0_DR5</name>\r
 881           <description>wIndexHi</description>\r
 882           <addressOffset>0x40006005</addressOffset>\r
 883           <size>8</size>\r
 884           <access>read-write</access>\r
 885           <resetValue>0</resetValue>\r
 886           <resetMask>0</resetMask>\r
 887         </register>\r
 888         <register>\r
 889           <name>USBFS_EP0_DR6</name>\r
 890           <description>lengthLo</description>\r
 891           <addressOffset>0x40006006</addressOffset>\r
 892           <size>8</size>\r
 893           <access>read-write</access>\r
 894           <resetValue>0</resetValue>\r
 895           <resetMask>0</resetMask>\r
 896         </register>\r
 897         <register>\r
 898           <name>USBFS_EP0_DR7</name>\r
 899           <description>lengthHi</description>\r
 900           <addressOffset>0x40006007</addressOffset>\r
 901           <size>8</size>\r
 902           <access>read-write</access>\r
 903           <resetValue>0</resetValue>\r
 904           <resetMask>0</resetMask>\r
 905         </register>\r
 906         <register>\r
 907           <name>USBFS_CR0</name>\r
 908           <description>USB Control Register 0</description>\r
 909           <addressOffset>0x40006008</addressOffset>\r
 910           <size>8</size>\r
 911           <access>read-write</access>\r
 912           <resetValue>0</resetValue>\r
 913           <resetMask>0</resetMask>\r
 914           <fields>\r
 915             <field>\r
 916               <name>device_address</name>\r
 917               <description>No description available</description>\r
 918               <lsb>0</lsb>\r
 919               <msb>6</msb>\r
 920               <access>read-only</access>\r
 921             </field>\r
 922             <field>\r
 923               <name>usb_enable</name>\r
 924               <description>No description available</description>\r
 925               <lsb>7</lsb>\r
 926               <msb>7</msb>\r
 927               <access>read-write</access>\r
 928             </field>\r
 929           </fields>\r
 930         </register>\r
 931         <register>\r
 932           <name>USBFS_CR1</name>\r
 933           <description>USB Control Register 1</description>\r
 934           <addressOffset>0x40006009</addressOffset>\r
 935           <size>8</size>\r
 936           <access>read-write</access>\r
 937           <resetValue>0</resetValue>\r
 938           <resetMask>0</resetMask>\r
 939           <fields>\r
 940             <field>\r
 941               <name>reg_enable</name>\r
 942               <description>No description available</description>\r
 943               <lsb>0</lsb>\r
 944               <msb>0</msb>\r
 945               <access>read-write</access>\r
 946             </field>\r
 947             <field>\r
 948               <name>enable_lock</name>\r
 949               <description>No description available</description>\r
 950               <lsb>1</lsb>\r
 951               <msb>1</msb>\r
 952               <access>read-write</access>\r
 953             </field>\r
 954             <field>\r
 955               <name>bus_activity</name>\r
 956               <description>No description available</description>\r
 957               <lsb>2</lsb>\r
 958               <msb>2</msb>\r
 959               <access>read-write</access>\r
 960             </field>\r
 961             <field>\r
 962               <name>trim_offset_msb</name>\r
 963               <description>No description available</description>\r
 964               <lsb>3</lsb>\r
 965               <msb>3</msb>\r
 966               <access>read-write</access>\r
 967             </field>\r
 968           </fields>\r
 969         </register>\r
 970         <register>\r
 971           <name>USBFS_SIE_EP1_CR0</name>\r
 972           <description>The Endpoint1 Control Register</description>\r
 973           <addressOffset>0x4000600E</addressOffset>\r
 974           <size>8</size>\r
 975           <access>read-write</access>\r
 976           <resetValue>0</resetValue>\r
 977           <resetMask>0</resetMask>\r
 978         </register>\r
 979         <register>\r
 980           <name>USBFS_USBIO_CR0</name>\r
 981           <description>USBIO Control Register 0</description>\r
 982           <addressOffset>0x40006010</addressOffset>\r
 983           <size>8</size>\r
 984           <access>read-write</access>\r
 985           <resetValue>0</resetValue>\r
 986           <resetMask>0</resetMask>\r
 987           <fields>\r
 988             <field>\r
 989               <name>rd</name>\r
 990               <description>No description available</description>\r
 991               <lsb>0</lsb>\r
 992               <msb>0</msb>\r
 993               <access>read-only</access>\r
 994             </field>\r
 995             <field>\r
 996               <name>td</name>\r
 997               <description>No description available</description>\r
 998               <lsb>5</lsb>\r
 999               <msb>5</msb>\r
1000               <access>read-write</access>\r
1001             </field>\r
1002             <field>\r
1003               <name>tse0</name>\r
1004               <description>No description available</description>\r
1005               <lsb>6</lsb>\r
1006               <msb>6</msb>\r
1007               <access>read-write</access>\r
1008             </field>\r
1009             <field>\r
1010               <name>ten</name>\r
1011               <description>No description available</description>\r
1012               <lsb>7</lsb>\r
1013               <msb>7</msb>\r
1014               <access>read-write</access>\r
1015             </field>\r
1016           </fields>\r
1017         </register>\r
1018         <register>\r
1019           <name>USBFS_USBIO_CR1</name>\r
1020           <description>USBIO Control Register 1</description>\r
1021           <addressOffset>0x40006012</addressOffset>\r
1022           <size>8</size>\r
1023           <access>read-write</access>\r
1024           <resetValue>0</resetValue>\r
1025           <resetMask>0</resetMask>\r
1026           <fields>\r
1027             <field>\r
1028               <name>dmo</name>\r
1029               <description>No description available</description>\r
1030               <lsb>0</lsb>\r
1031               <msb>0</msb>\r
1032               <access>read-only</access>\r
1033             </field>\r
1034             <field>\r
1035               <name>dpo</name>\r
1036               <description>No description available</description>\r
1037               <lsb>1</lsb>\r
1038               <msb>1</msb>\r
1039               <access>read-only</access>\r
1040             </field>\r
1041             <field>\r
1042               <name>usbpuen</name>\r
1043               <description>No description available</description>\r
1044               <lsb>2</lsb>\r
1045               <msb>2</msb>\r
1046               <access>read-write</access>\r
1047             </field>\r
1048             <field>\r
1049               <name>iomode</name>\r
1050               <description>No description available</description>\r
1051               <lsb>5</lsb>\r
1052               <msb>5</msb>\r
1053               <access>read-write</access>\r
1054             </field>\r
1055           </fields>\r
1056         </register>\r
1057         <register>\r
1058           <name>USBFS_SIE_EP2_CR0</name>\r
1059           <description>The Endpoint2 Control Register</description>\r
1060           <addressOffset>0x4000601E</addressOffset>\r
1061           <size>8</size>\r
1062           <access>read-write</access>\r
1063           <resetValue>0</resetValue>\r
1064           <resetMask>0</resetMask>\r
1065         </register>\r
1066         <register>\r
1067           <name>USBFS_SIE_EP3_CR0</name>\r
1068           <description>The Endpoint3 Control Register</description>\r
1069           <addressOffset>0x4000602E</addressOffset>\r
1070           <size>8</size>\r
1071           <access>read-write</access>\r
1072           <resetValue>0</resetValue>\r
1073           <resetMask>0</resetMask>\r
1074         </register>\r
1075         <register>\r
1076           <name>USBFS_SIE_EP4_CR0</name>\r
1077           <description>The Endpoint4 Control Register</description>\r
1078           <addressOffset>0x4000603E</addressOffset>\r
1079           <size>8</size>\r
1080           <access>read-write</access>\r
1081           <resetValue>0</resetValue>\r
1082           <resetMask>0</resetMask>\r
1083         </register>\r
1084         <register>\r
1085           <name>USBFS_SIE_EP5_CR0</name>\r
1086           <description>The Endpoint5 Control Register</description>\r
1087           <addressOffset>0x4000604E</addressOffset>\r
1088           <size>8</size>\r
1089           <access>read-write</access>\r
1090           <resetValue>0</resetValue>\r
1091           <resetMask>0</resetMask>\r
1092         </register>\r
1093         <register>\r
1094           <name>USBFS_SIE_EP6_CR0</name>\r
1095           <description>The Endpoint6 Control Register</description>\r
1096           <addressOffset>0x4000605E</addressOffset>\r
1097           <size>8</size>\r
1098           <access>read-write</access>\r
1099           <resetValue>0</resetValue>\r
1100           <resetMask>0</resetMask>\r
1101         </register>\r
1102         <register>\r
1103           <name>USBFS_SIE_EP7_CR0</name>\r
1104           <description>The Endpoint7 Control Register</description>\r
1105           <addressOffset>0x4000606E</addressOffset>\r
1106           <size>8</size>\r
1107           <access>read-write</access>\r
1108           <resetValue>0</resetValue>\r
1109           <resetMask>0</resetMask>\r
1110         </register>\r
1111         <register>\r
1112           <name>USBFS_SIE_EP8_CR0</name>\r
1113           <description>The Endpoint8 Control Register</description>\r
1114           <addressOffset>0x4000607E</addressOffset>\r
1115           <size>8</size>\r
1116           <access>read-write</access>\r
1117           <resetValue>0</resetValue>\r
1118           <resetMask>0</resetMask>\r
1119         </register>\r
1120         <register>\r
1121           <name>USBFS_BUF_SIZE</name>\r
1122           <description>Dedicated Endpoint Buffer Size Register</description>\r
1123           <addressOffset>0x4000608C</addressOffset>\r
1124           <size>8</size>\r
1125           <access>read-write</access>\r
1126           <resetValue>0</resetValue>\r
1127           <resetMask>0</resetMask>\r
1128         </register>\r
1129         <register>\r
1130           <name>USBFS_EP_ACTIVE</name>\r
1131           <description>Endpoint Active Indication Register</description>\r
1132           <addressOffset>0x4000608E</addressOffset>\r
1133           <size>8</size>\r
1134           <access>read-write</access>\r
1135           <resetValue>0</resetValue>\r
1136           <resetMask>0</resetMask>\r
1137         </register>\r
1138         <register>\r
1139           <name>USBFS_EP_TYPE</name>\r
1140           <description>Endpoint Type (IN/OUT) Indication</description>\r
1141           <addressOffset>0x4000608F</addressOffset>\r
1142           <size>8</size>\r
1143           <access>read-write</access>\r
1144           <resetValue>0</resetValue>\r
1145           <resetMask>0</resetMask>\r
1146         </register>\r
1147         <register>\r
1148           <name>USBFS_USB_CLK_EN</name>\r
1149           <description>USB Block Clock Enable Register</description>\r
1150           <addressOffset>0x4000609D</addressOffset>\r
1151           <size>8</size>\r
1152           <access>read-write</access>\r
1153           <resetValue>0</resetValue>\r
1154           <resetMask>0</resetMask>\r
1155         </register>\r
1156       </registers>\r
1157     </peripheral>\r
1158   </peripherals>\r
1159 </device>