Fix for more than 2 devices via USB MSC

[SCSI2SD-V6.git] / CHANGELOG

diff --git a/CHANGELOG b/CHANGELOG
index 3a4442a..1f4f29c 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,64 +1,18 @@
-20140718               3.5.2
-       - Fix blank SCSI ID in scsi2sd-config output.
+20160815               6.0.6
+       - Fix performance bugs
 
-20140717               3.5.1
-       - Allow building utilities on older Linux distros
-       - Resolve missing DLL issues for the Windows utilities
-       - Fix scsi2sd-config crash on Mac.
+20160814               6.05
+       - More SCSI bug fixes (some timing issues resolved in the FPGA image)
+       - Firmware update support using scsi2sd-util6.
 
-20140713               3.5
-       - Fixed several performance issues. Transfer rates up to 2.5MB/s are now
-       possible.
-       - Implemented the READ BUFFER scsi command for performance testing purposes.
-       - Added support for the new "yellow" v4.2 revision boards.
-       - Improved firmware uploading. bootloaderhost can now reset the board back
-       to the bootloader.
-       - Display firmware version in scsi2sd-config
-       - Add "--reset" parameter to scsi2sd-config
+20160716               6.03 (BETA3)
+       - SCSI bug fixes.
 
-20140418               3.4
-       - Critical fix for writes when using non-standard block sizes.
-       - Fix to ensure SCSI phase bits are set atomically.
-       - Always return the requested number of bytes for a REQUEST SENSE command
-               This is required to support the Ensoniq ASR-10.
-       - Decreased (unused) heap and stack sizes to prepare for a memory
-       write cache
-       - Increased the maximum sector size to 8192 bytes.
+20160616               6.01
+       - Improved SD card compatibility
+       - Fixed SCSI interfaces on slower SCSI controllers
+       - Significant performance improvements
+       - Added SD card hotswap support.
 
-20140416               3.3
-       - Fix to SCSI Reset handling to avoid lockups
-       - Bug fixes to improve standards compatibility
-       - Bug fix for Unit Attention Condition, which is now enabled by default.
-               scsi2sd-config can be used to disable it for those systems that
-               truely require it (eg. Mac Plus).
-       - Added Linked commands support.
-       - Added support for configurable sector sizes between 64 and 2048 bytes.
-               The sector size can be set via the MODE SELECT command using a SCSI
-               format utility, or via scsi2sd-config
-       - Powerbook firmware added
-
-20140214               3.2
-       - Remove hacks around ATN handling, and implement proper select-with-atn
-       support.  This fix is essential for communicating with some SCSI hosts.
-       All SCSI2SD users are urged to upgrade to this firmware version.
-       - More fixes to support Apple HD SC Setup (thanks to Doug Brown!)
-       - Fixes to support SCSI1 initiators
-               * Support non-arbitrating initiators.
-               * Support single-initiator option.
-               * Set CCS response format flag in INQUIRY response.
-
-20131227               3.1
-       - Fixes for better SCSI reset handling
-       - Fix for reading the last sector of the SD card.
-       - Performance improvements. 2.5x read, 2x write performance.
-
-20131209               3.0.1
-       - Bugfix release.
-       - Fixes to support formatting with Apple HD SC Setup. This is very slow,
-               Apple Drive Setup is preferred
-       - Reliability improvement for rejecting unknown SCSI messages.
-       - Reliability improvements for SD card initialisation and reading.
-
-
-20131027               3.0
-       - Initial public release.
+20160528               6.0
+       - First BETA firmware for the 6.0 hardware version of the SCSI2SD.