Added glitch filter on ACK line, registered all outputs, double-synced inputs, and...

[SCSI2SD-V6.git] / readme.txt

diff --git a/readme.txt b/readme.txt
index daaea7c..0188152 100644 (file)
--- a/readme.txt
+++ b/readme.txt
@@ -45,26 +45,53 @@ Performance
 
 As currently implemented:
 
-Sequential read: 930kb/sec Sequential write: 900kb/sec
+Transfer size:    512        2048        8192        65536
+-------------------------------------------------------
+read:                  2MB/s     2.1MB/s     2.5MB/s     2.6MB/s
+write:                 125kB/s   441kB/s     1.5MB/s     2.3MB/s
+-------------------------------------------------------
+
 
 Tested with a 16GB class 10 SD card, via the commands:
 
  # WRITE TEST
- sudo dd bs=8192 count=100 if=/dev/zero of=/dev/sdX oflag=dsync
+ sudo dd bs=${SIZE} count=100 if=/dev/zero of=/dev/sdX oflag=dsync
 
  # READ TEST
- sudo dd bs=8192 count=100 if=/dev/sdX of=/dev/null
+ sudo dd bs=${SIZE} count=100 if=/dev/sdX of=/dev/null
 
 Compatibility
 
-Tested with Linux (current), Apple Macintosh System 7.5.3 on LC-III, and LC-475 hardware.
-
-Users have reported success on these systems:
+ Desktop systems
 
+    Mac LC-III and LC-475
     Mac II running System 6.0.8
     Mac SE/30
+    Apple IIgs using Apple II High Speed SCSI controller card (from v3.3)
+    Symbolics Lisp Machine XL1200, using 1280 byte sectors (from v3.4)
+    PDP-11/73 running RSX11M+ V4.6
+    Microvax 3100 Model 80 running VMS 7.3 (needs patch against v3.5.2 firmware) 
+    Amiga 500+ with GVP A530
+    Atari TT030 System V 
+
+Samplers
+
     Roland JS-30 Sampler
     Akai S1000, S3200, S3000XL, MPC 2000XL, DPS 12
+        SCSI cable reversed on S3200
+        There are compatibility problems with the Akai MPC3000. It works (slowly) with the alternate Vailixi OS with multi-sector transfers disabled. 
     EMU Emulator E4X with EOS 3.00b and E6400 (classic) with Eos 4.01
     Ensoniq ASR-X, ASR-10 (from v3.4, 2GB size limit)
+        ASR-20 Requires TERMPWR jumper. 
+    Kurzweil K2000R
+        See kurzweil.com for size limits which a dependant on the OS version. Older OS versions have a 1GB limit.
+        SCSI cable reversed 
+    Casio FZ-20M
+        Requires TERMPWR jumper. The manual shows the pin25 of the DB25 connector is "not connected".
+        May require scsi2sd-config --apple flag 
+    Yamaha EX5R 
+
+Other
+
     HP 16601A logic analyzer
+    Fluke 9100 series