X-Git-Url: http://www.codesrc.com/gitweb/index.cgi?p=SCSI2SD-V6.git;a=blobdiff_plain;f=CHANGELOG;h=1f4f29cb679a663ca8403416189431dfbc643f90;hp=642d483433051423552bf55768a8ba6462825bd7;hb=f552feb1bb074f17e9447fc0460a645fd9ec9afb;hpb=a8cd4216a2159a1daa6ed4f42586b489fffac43c

diff --git a/CHANGELOG b/CHANGELOG
index 642d4834..1f4f29cb 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,72 +1,18 @@
-201408XX		3.6
-	- Fix handling requests for LUNs other than 0 from SCSI-2 hosts.
-	- Handle glitches of the scsi signals to improve stability and operate with
-	multiple devices on the SCSI bus.
-	- Re-add parity checking. This can be disabled using scsi2sd-config if
-	required.
-	- Added disconnect/reconnect support during SD card writes.
+20160815		6.0.6
+	- Fix performance bugs
 
-20140718		3.5.2
-	- Fix blank SCSI ID in scsi2sd-config output.
+20160814		6.05
+	- More SCSI bug fixes (some timing issues resolved in the FPGA image)
+	- Firmware update support using scsi2sd-util6.
 
-20140717		3.5.1
-	- Allow building utilities on older Linux distros
-	- Resolve missing DLL issues for the Windows utilities
-	- Fix scsi2sd-config crash on Mac.
+20160716		6.03 (BETA3)
+	- SCSI bug fixes.
 
-20140713		3.5
-	- Fixed several performance issues. Transfer rates up to 2.5MB/s are now
-	possible.
-	- Implemented the READ BUFFER scsi command for performance testing purposes.
-	- Added support for the new "yellow" v4.2 revision boards.
-	- Improved firmware uploading. bootloaderhost can now reset the board back
-	to the bootloader.
-	- Display firmware version in scsi2sd-config
-	- Add "--reset" parameter to scsi2sd-config
+20160616		6.01
+	- Improved SD card compatibility
+	- Fixed SCSI interfaces on slower SCSI controllers
+	- Significant performance improvements
+	- Added SD card hotswap support.
 
-20140418		3.4
-	- Critical fix for writes when using non-standard block sizes.
-	- Fix to ensure SCSI phase bits are set atomically.
-	- Always return the requested number of bytes for a REQUEST SENSE command
-		This is required to support the Ensoniq ASR-10.
-	- Decreased (unused) heap and stack sizes to prepare for a memory
-	write cache
-	- Increased the maximum sector size to 8192 bytes.
-
-20140416		3.3
-	- Fix to SCSI Reset handling to avoid lockups
-	- Bug fixes to improve standards compatibility
-	- Bug fix for Unit Attention Condition, which is now enabled by default.
-		scsi2sd-config can be used to disable it for those systems that
-		truely require it (eg. Mac Plus).
-	- Added Linked commands support.
-	- Added support for configurable sector sizes between 64 and 2048 bytes.
-		The sector size can be set via the MODE SELECT command using a SCSI
-		format utility, or via scsi2sd-config
-	- Powerbook firmware added
-
-20140214		3.2
-	- Remove hacks around ATN handling, and implement proper select-with-atn
-	support.  This fix is essential for communicating with some SCSI hosts.
-	All SCSI2SD users are urged to upgrade to this firmware version.
-	- More fixes to support Apple HD SC Setup (thanks to Doug Brown!)
-	- Fixes to support SCSI1 initiators
-		* Support non-arbitrating initiators.
-		* Support single-initiator option.
-		* Set CCS response format flag in INQUIRY response.
-
-20131227		3.1
-	- Fixes for better SCSI reset handling
-	- Fix for reading the last sector of the SD card.
-	- Performance improvements. 2.5x read, 2x write performance.
-
-20131209		3.0.1
-	- Bugfix release.
-	- Fixes to support formatting with Apple HD SC Setup. This is very slow,
-		Apple Drive Setup is preferred
-	- Reliability improvement for rejecting unknown SCSI messages.
-	- Reliability improvements for SD card initialisation and reading.
-
-
-20131027		3.0
-	- Initial public release.
+20160528		6.0
+	- First BETA firmware for the 6.0 hardware version of the SCSI2SD.