SCSI2SD V5 Compatibility: Difference between revisions

From code/src wiki
Jump to navigationJump to search
← Older edit
 
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
=== Computer systems ===
=== Computer systems ===
* [[Mac Plus]]
* Mac LC-III and LC-475
* Mac LC-III and LC-475
* Mac II running System 6.0.8
* Mac II running System 6.0.8
* Mac SE/30
* Mac SE/30
* Macintosh IIci running A/UX 3.01, 3.02, 3.1 and 3.11
* Apple IIgs using Apple II High Speed SCSI controller card
* Apple IIgs using Apple II High Speed SCSI controller card
* Symbolics Lisp Machine XL1200, using 1280 byte sectors
* Symbolics Lisp Machine XL1200, using 1280 byte sectors
Line 10: Line 12:
* Commodore Amiga 500+ with GVP A530
* Commodore Amiga 500+ with GVP A530
* Commodore Amiga 500 KS 1.3 with Oktagon 508 SCSI-2 controller
* Commodore Amiga 500 KS 1.3 with Oktagon 508 SCSI-2 controller
* Amiga 1200 with [http://amiga.resource.cx/exp/taifun2 Typhoon] accelerator card.
* Amiga 2000 (B2000 rev 6.4 ECS) with DKB RapidFire SCSI 1 card
* Amiga 2000 (B2000 rev 6.4 ECS) with DKB RapidFire SCSI 1 card
** May require [http://www.codesrc.com/files/scsi2sd/latest/bootloader/USB_Bootloader-V5_nodelay.bin bootloader] replacement if it only starts up while on USB power.
* Amiga 3000
* Amiga 3000
** May require [http://www.codesrc.com/files/scsi2sd/latest/bootloader/USB_Bootloader-V5_nodelay.bin bootloader] replacement if it only starts up while on USB power.
* Amiga 4000 equipped with CyberStorm PPC using 68pin adapter.
* Amiga 4000 equipped with CyberStorm PPC using 68pin adapter.
* Atari TT030 System V
* Atari TT030 System V
* Atari TT running TOS 3.06 with HDDRIVER software version 9.06
* Atari TT running TOS 3.06 with HDDRIVER software version 9.06
* Atari Mega ST 1; TOS 1.04; Protar ProFile 30 external hard drive enclosure (1GB size limitation)
* Atari Mega ST 1; TOS 1.04; Protar ProFile 30 external hard drive enclosure (1GB size limitation)
* Atari mega st with ICD host adapter
* Atari MEGA STE
* Atari MEGA STE
** needs J3 TERMPWR jumper
** 1GB limit (--blocks=2048000). The OS will fail to read the boot sector if the disk is >= 1GB.
** 1GB limit (--blocks=2048000). The OS will fail to read the boot sector if the disk is >= 1GB.
* Atari Falcon, TOS 4.02, HDDRIVER 9.06 driver
* Atari Falcon, TOS 4.02, HDDRIVER 9.06 driver
* Atari Stacy
* Sharp X68000
* Sharp X68000
** SASI models supported. See [http://gamesx.com/wiki/doku.php?id=x68000:hard_drive_on_sasi_machine gamesx.com] for information on building a custom cable.
** SASI models supported. See [http://gamesx.com/wiki/doku.php?id=x68000:hard_drive_on_sasi_machine gamesx.com] for information on building a custom cable.
** needs J3 TERMPWR jumper
** [https://nfggames.com/forum2/index.php?topic=6380.0 Installing SCSI2SD on SASI X68000 systems EXTERNALLY]
** [https://nfggames.com/forum2/index.php?topic=6383.0 Installing SCSI2SD on SCSI-2 X68000 systems EXTERNALLY]
** Set to SCSI ID 3.  ID0 will not work.
** Set to SCSI ID 3.  ID0 will not work.
* [http://www.alphalinux.net/wiki/index.php/SCSI2SD Compaq XP-1000 Professional Workstation]
* [http://www.alphalinux.net/wiki/index.php/SCSI2SD Compaq XP-1000 Professional Workstation]
** Alpha 21264 CPU, 667MHz, with a QLogic SCSI controller in a PCI slot
** Alpha 21264 CPU, 667MHz, with a QLogic SCSI controller in a PCI slot
* SCSI-based Macintosh Powerbooks (2.5" SCSI2SD)
** Also reported to work on [http://www.codesrc.com/images/SCSI2SD/scsi2sd-winnt.png Thinkpad 860 running Win NT 4.0 PowerPC].
* AT&T 3B2/600
* AT&T 3B2/600
* Sun 2/120 Workstation (Unit Attention disabled)
* Sun 2/120 Workstation (Unit Attention disabled)
Line 52: Line 53:
* [http://www.nekochan.net/wiki/SCSI2SD SGI Indy]
* [http://www.nekochan.net/wiki/SCSI2SD SGI Indy]
* [https://www.thenimbus.co.uk/upgrades-and-maintenance/scsi2sd RM Nimbus]
* [https://www.thenimbus.co.uk/upgrades-and-maintenance/scsi2sd RM Nimbus]
* HP 9000/715 with HP-UX 9.X and 10.X
* DECstation 5000/120
* SAIC Galaxy 1100 workstation (modified HP 9000/712), NeXTSTEP 3.3
* [https://wohali.dreamwidth.org/76949.html WICAT S2275]
* IBM RS/6000 7043-150 system
** Requires the "Slow" setting in scsi2sd-util


=== Samplers ===
=== Samplers ===
* Roland JS-30 Sampler
* Roland JS-30 Sampler
* [http://llamamusic.com/s50s550/DIY_page.html#SCSI2SD Roland W-30]
* [http://llamamusic.com/s50s550/DIY_page.html#SCSI2SD Roland W-30]
** More info at [https://drive.google.com/open?id=1kVmx5AUkcaLO7QVRnVD-lBKBw_ku_rMa]
* [http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=1430392#Post1430392 Roland VS2480]
* [http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=1430392#Post1430392 Roland VS2480]
* Roland S-760, S-770
* Roland S-760, S-770
* Roland XV-5080
* Roland XV-5080
* Roland G1000
* [https://www.youtube.com/watch?v=qR0WqNei9CE Akai S950]
* [https://www.youtube.com/watch?v=qR0WqNei9CE Akai S950]
* Akai S1000, S2000, S3200, S3000XL, MPC 2000XL, DPS 12
* Akai S1000, S2000, S3200, S3000XL, MPC 2000XL, DPS 12
** SCSI cable reversed on S3200
** SCSI cable reversed on S1100 and S3200
** There are compatibility problems with the Akai MPC3000. It works with the alternate Vailixi 3.5 OS with multi-sector transfers disabled.
** There are compatibility problems with the Akai MPC3000. It works with the alternate Vailixi 3.5 OS with multi-sector transfers disabled.
** [https://youtu.be/8mph35acMVM MPC3000 example video]
** [https://youtu.be/8mph35acMVM MPC3000 example video]
* AKAI S5000 and S6000 with Firmware Version 2.14
* AKAI S5000 and S6000 with Firmware Version 2.14
* [[EMU Emulator E4X]] with EOS 3.00b and E6400 (classic) with Eos 4.01
* [[EMU Emulator E4X]] with EOS 3.00b and E6400 (classic) with Eos 4.01
* Akai DR4 and AKAI DR4VR hard disk recorder
* EMU E6400 w/ EOS2.80f
* EMU E6400 w/ EOS2.80f
* EMU Emax1, Emax 2
* EMU Emax1, Emax 2
Line 75: Line 85:
* EMU Darwin 8ch hard disk recorder
* EMU Darwin 8ch hard disk recorder
* Emu ESI2000, ESI4000
* Emu ESI2000, ESI4000
* Emu ESI32
** Test with sampler Firmware 2.10
** May require external power.
** 1Gb limit
* E-mu Emulator EIVK (sampler keyboard) with EOS 3.00b.
** Requires separate power cable
* Ensoniq ASR-X, ASR-10 (from v3.4, 2GB size limit)
* Ensoniq ASR-X, ASR-10 (from v3.4, 2GB size limit)
** ASR-10 Requires TERMPWR jumper (applies to pre. 5.0 SCSI2SD boards only)
** ASR-10 Requires TERMPWR jumper (applies to pre. 5.0 SCSI2SD boards only)
Line 96: Line 112:
* Sequential Circuits Studio 440. [https://photos.google.com/share/AF1QipMT7rhI0gU4Cf9dDgphnImxan7IgH0jnzcSA5GPws3MyVST9H6Ni90ev0q0e6EpeQ?key=OTJmSEZqbFlZbUpxTXZSNEkyWlk5SDlhZ3JHZmZn]
* Sequential Circuits Studio 440. [https://photos.google.com/share/AF1QipMT7rhI0gU4Cf9dDgphnImxan7IgH0jnzcSA5GPws3MyVST9H6Ni90ev0q0e6EpeQ?key=OTJmSEZqbFlZbUpxTXZSNEkyWlk5SDlhZ3JHZmZn]
** Max size = 1GB
** Max size = 1GB
* [[Fairlight Series -III]]


=== Other ===
=== Other ===

Latest revision as of 03:00, 10 August 2020

Computer systems

  • Mac Plus
  • Mac LC-III and LC-475
  • Mac II running System 6.0.8
  • Mac SE/30
  • Macintosh IIci running A/UX 3.01, 3.02, 3.1 and 3.11
  • Apple IIgs using Apple II High Speed SCSI controller card
  • Symbolics Lisp Machine XL1200, using 1280 byte sectors
  • PDP-11/73 running RSX11M+ V4.6
  • Microvax 3100 Model 80 running VMS 7.3
  • Commodore Amiga 500+ with GVP A530
  • Commodore Amiga 500 KS 1.3 with Oktagon 508 SCSI-2 controller
  • Amiga 1200 with Typhoon accelerator card.
  • Amiga 2000 (B2000 rev 6.4 ECS) with DKB RapidFire SCSI 1 card
  • Amiga 3000
  • Amiga 4000 equipped with CyberStorm PPC using 68pin adapter.
  • Atari TT030 System V
  • Atari TT running TOS 3.06 with HDDRIVER software version 9.06
  • Atari Mega ST 1; TOS 1.04; Protar ProFile 30 external hard drive enclosure (1GB size limitation)
  • Atari mega st with ICD host adapter
  • Atari MEGA STE
    • 1GB limit (--blocks=2048000). The OS will fail to read the boot sector if the disk is >= 1GB.
  • Atari Falcon, TOS 4.02, HDDRIVER 9.06 driver
  • Atari Stacy
  • Sharp X68000
  • Compaq XP-1000 Professional Workstation
    • Alpha 21264 CPU, 667MHz, with a QLogic SCSI controller in a PCI slot
  • AT&T 3B2/600
  • Sun 2/120 Workstation (Unit Attention disabled)
  • Sun 4/50 workstation
  • Data General MV/2500DC running AOS/VS
    • Requires changing deviceTypeModifier to 0x4c in XML config file. Configurable deviceTypeModifier is supported from firmware v4.3.
  • Applix 1616
  • IMS MM/1
  • NeXTcube + NeXTSTEP 3.3
  • NeXTStation
    • Modified geometry settings are required to avoid "cylinder group too large" errors while formatting. Configurable geometry is supported from firmware v4.3
  • Apollo 400/425s running DOMAIN/OS
  • Motorola System V/68 R3V7 and R3V8.
    • Since the installation have information about limited number of drives(most of them with custom commands) it requires a pre-installed disk image to be dd-ed on it. Works with MVME167 and MVME177
  • Motorola System V/88 R40V4.0 through R40V4.4
  • BBC micro/Master with Akhter host adapter
  • Sun SparcStation 2 w/ Solaris 2.5.1
  • Solbourne S3000
  • TI-99/4A
  • Myarc Geneve 9640
  • SGI Indy
  • RM Nimbus
  • HP 9000/715 with HP-UX 9.X and 10.X
  • DECstation 5000/120
  • SAIC Galaxy 1100 workstation (modified HP 9000/712), NeXTSTEP 3.3
  • WICAT S2275
  • IBM RS/6000 7043-150 system
    • Requires the "Slow" setting in scsi2sd-util

Samplers

  • Roland JS-30 Sampler
  • Roland W-30
    • More info at [1]
  • Roland VS2480
  • Roland S-760, S-770
  • Roland XV-5080
  • Roland G1000
  • Akai S950
  • Akai S1000, S2000, S3200, S3000XL, MPC 2000XL, DPS 12
    • SCSI cable reversed on S1100 and S3200
    • There are compatibility problems with the Akai MPC3000. It works with the alternate Vailixi 3.5 OS with multi-sector transfers disabled.
    • MPC3000 example video
  • AKAI S5000 and S6000 with Firmware Version 2.14
  • EMU Emulator E4X with EOS 3.00b and E6400 (classic) with Eos 4.01
  • Akai DR4 and AKAI DR4VR hard disk recorder
  • EMU E6400 w/ EOS2.80f
  • EMU Emax1, Emax 2
    • E-Mu Emax video
    • Emax 2 video
    • To boot the emax you will need to use the internal scsi connection, rear db25 does not support scsi boot
    • Set SCSI2SD "Selection Delay" parameter to 1ms
  • E-mu EIIIXP, EIIIXS
  • EMU Darwin 8ch hard disk recorder
  • Emu ESI2000, ESI4000
  • Emu ESI32
    • Test with sampler Firmware 2.10
    • May require external power.
    • 1Gb limit
  • E-mu Emulator EIVK (sampler keyboard) with EOS 3.00b.
    • Requires separate power cable
  • Ensoniq ASR-X, ASR-10 (from v3.4, 2GB size limit)
  • Ensoniq EPS16+
  • Kurzweil K2000R
    • See kurzweil.com for size limits which a dependant on the OS version. Older OS versions have a 1GB limit.
    • SCSI cable reversed
  • Kurzweil K2500XS
  • Casio FZ-20M
    • Requires TERMPWR jumper. The manual shows the pin25 of the DB25 connector is "not connected".
    • May require scsi2sd-config --apple flag
  • Yamaha A5000, A3000, EX5, EX5R, RS7000
  • EMU ESI4000 [2] [3]
  • Synclavier 9600.
    • Disable Parity. Max size == 9GB.
  • Waveframe 1000
    • Max size = 16GB
  • Sequential Circuits Studio 440. [4]
    • Max size = 1GB
  • Fairlight Series -III

Other

Retrieved from "https://www.codesrc.com/mediawiki/index.php?title=SCSI2SD_V5_Compatibility&oldid=577"