SCSI2SD: Difference between revisions

From code/src wiki
Jump to navigationJump to search
Line 48: Line 48:


* The source/designs of any modifications must be provided to those you distribute the board to.
* The source/designs of any modifications must be provided to those you distribute the board to.
* Clones are based on the obsolete V4 design, lack features, and may not be compatible with all the systems listed on these pages.


Artmix is currently selling unlicensed modified clones ("SD SusanoMonster"), and refuses to comply with the GPL. Please do not purchase this board. If you have already purchased, please request the seller provides you with the modified designs under the GPL licence.
Artmix is currently selling unlicensed modified clones ("SD SusanoMonster"), and refuses to comply with the GPL. Please do not purchase this board. If you have already purchased, please request the seller provides you with the modified designs under the GPL licence.

Revision as of 09:35, 1 October 2018

The SCSI Hard Drive Emulator for retro computing.

scsi2sd-5.1-6.0-small.jpg


Download

  1. downloads for v3/v4/v5/v5.1 hardware revisions.
  2. downloads for v6 hardware revisions. This firmware will NOT work on the older boards.

News

[26 Sep 2018]v4.8.1 v6.2.0 New Firmware

  • Fix bug when writing with multiple SCSI devices on the chain (4.8.1, 6.2.0).
  • Fix bug with non-512 byte sectors (6.2.0)
  • Performance improvements to write speeds (6.2.0)


[16 April 2018]v4.8 New Firmware

  • Support for v5.1 hardware boards, including faster bootloader for better Staubli and Amiga support.
  • Added a speed selection to scsi2sd-util. Users with older SASI or SCSI1 controllers should select the lower speed for stability.
  • Added specific support for emulating XEBEC controllers
  • Added SCSI host-types selection to scsi2sd-util. Apple Macintosh users should manually fix their settings to use the Apple mode.
  • Apple mode pages now only sent when in Apple mode.
  • Fix Unit Serial Number inquiry page to use return configured serial number

[31 Jan 2018]v6.1.3 Bugfix release

  • Fixes several synchronous transfer bugs, especially write issues at 10MB/s

SCSI2SD Archived News

Overview

SCSI2SD is an emulator for old SCSI hard drives. It allows replacing one or several old broken SCSI drives with a SD memory card.


Unlicenced Copies

Older versions of the SCSI2SD hardware designs were published under the GPL licence. This permits anyone to build their own board from the original or modified designs, so long as they abide by the licence terms.

  • The source/designs of any modifications must be provided to those you distribute the board to.
  • Clones are based on the obsolete V4 design, lack features, and may not be compatible with all the systems listed on these pages.

Artmix is currently selling unlicensed modified clones ("SD SusanoMonster"), and refuses to comply with the GPL. Please do not purchase this board. If you have already purchased, please request the seller provides you with the modified designs under the GPL licence.

Which version should you buy ?

SCSI2SD V6 This board offers significantly better performance than the V5.x boards by adding support for synchronous SCSI transfers.

Easy access to virtual disk data over USB.

SCSI2SD V5.1 This is a newer version of the V5 board, with software-enabled termination, full-size SD card, and floppy-style power connector.

This version provides a faster startup time than V5, which is needed to boot some Amiga and Staubli machines

SCSI2SD V5 This is the older version which uses micro SD cards.
SCSI2SD for Powerbook Designed for Apple Powerbook laptops using 2.5" drives.

Purchase

3rd party accessories

  • durhamcardco.com Internal faceplates for V5 and V6 boards, and external V5 case.
  • Thingiverse nibblernibbles has created a 3d-printable external enclosure for the SCSI2SD + DB25 adapter. Power can be supplied over USB for hosts which don't supply termination power.
  • SCSI2SD V5 & V6 Bracket by Maya Designs
  • SamplerZone.com External cases for V5.0, V5.1, and V6 boards, internal cables for all music samplers, and fully-realized SCSI2SD sampler solutions.

Features

  1. In-built active terminator.
  2. Emulates up to 4 SCSI devices (7 for the V6 version)
  3. Supports sector sizes from 64 bytes to 8192 bytes
  4. Firmware updatable over USB
  5. Highly configurable over USB
    • Selectable SCSI ID
    • Selectable parity support
    • Enable/disable Unit Attention Condition
    • Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
    • Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities).
  6. External LED connector.

Technical Specifications

V5 hardware V5.1 hardware V6 hardware
SCSI Interface SCSI-2 Narrow 8-bit 50-pin connector.

Supports asynchronous transfers only.

SCSI-2 Narrow 8-bit 50-pin connector with optional DB25 female socket.

Supports asynchronous transfers only.

SCSI-2 Narrow 8-bit 50-pin connector.

FAST10 (10MB/s) synchronous transfers.

SCSI Terminator Active Terminator

Resistor packs can be removed from the socket to disable the terminator

Active Terminator

Enabled via software using scsi2sd-util

Active Terminator

Enabled via software using scsi2sd-util

SD Card Interface microSD, tested up to 64GB

Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)

Full-size, tested up to 128GB

Communication is via the SPI protocol at 25MHz (3MB/s theoretical max)

Full-size SD, tested up to 128GB

Up to 20MB/s

USB Interface Firmware updates and configuration

USB 2.0 micro-B

Firmware updates and configuration

USB 2.0 micro-B

Firmware updates, configuration, and mass-storage

USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)

Power 5V via standard Molex 4-pin drive connector, USB, or self-powered using the SCSI host termination power.

2.35W maximum (500mA)

DO NOT CONNECT 12V at all if you need to make your own power cable as it risks destroying the board if you accidentally swap the wires.

5V via floppy 4-pin drive connector, USB, or self-powered using the SCSI host termination power.

2.35W maximum (500mA)

DO NOT CONNECT 12V at all if you need to make your own power cable as it risks destroying the board if you accidentally swap the wires.

5V via floppy 4-pin drive connector, USB, or self-powered using the SCSI host termination power.

2.35W maximum (500mA)

Dimensions (L x W x H) 5cm x 10cm x 1.5cm 10cm x 9cm x 1.5cm 10cm x 9cm x 1.5cm
Performance

Tested under optimal conditions. For comparison, here are some benchmarks of some older SCSI hardware.

Up to 2.6MB/s read, 2.3MB/s write

(1.1MB/s on most older SCSI hosts)

Up to 2.6MB/s read, 2.3MB/s write

(1.1MB/s on most older SCSI hosts)

Up to 10MB/s.

Compatibility

Files

Firmware update utility and configuration tool at:

  1. downloads for v3/v4/v5/v5.1.
  2. downloads for v6.

These files are currently available for Windows, Linux, and Mac OSX.

A copy of all sources can be obtained via the command:

git clone --recursive git://www.codesrc.com/git/SCSI2SD

or (for V6)

git clone --recursive git://www.codesrc.com/git/SCSI2SD-V6


Alternatively, the git sources can be viewed using your web browser by clicking here or here (V6)

Howto

Alternative Open SCSI Projects

  • AJ's alternative implementation. AJ and I originally had a competition to design and build a SCSI device to boot an old Mac LCIII. The deadline for that competition has long-since expired without a winner, but we have both continued to progress our designs.
  • S2I (was: SCSI2IDE)
  • AVR based SCSI RAM disk

Old

For historical project information see SCSI2SD old