SCSI2SD V5 Compatibility

From code/src wiki
Jump to: navigation, search

Computer systems

  • Mac Plus
  • Mac LC-III and LC-475
  • Mac II running System 6.0.8
  • Mac SE/30
  • Apple IIgs using Apple II High Speed SCSI controller card
  • Symbolics Lisp Machine XL1200, using 1280 byte sectors
  • PDP-11/73 running RSX11M+ V4.6
  • Microvax 3100 Model 80 running VMS 7.3
  • Commodore Amiga 500+ with GVP A530
  • Commodore Amiga 500 KS 1.3 with Oktagon 508 SCSI-2 controller
  • Amiga 2000 (B2000 rev 6.4 ECS) with DKB RapidFire SCSI 1 card
    • May require bootloader replacement if it only starts up while on USB power.
  • Amiga 3000
    • May require bootloader replacement if it only starts up while on USB power.
  • Amiga 4000 equipped with CyberStorm PPC using 68pin adapter.
  • Atari TT030 System V
  • Atari TT running TOS 3.06 with HDDRIVER software version 9.06
  • Atari Mega ST 1; TOS 1.04; Protar ProFile 30 external hard drive enclosure (1GB size limitation)
  • Atari MEGA STE
    • needs J3 TERMPWR jumper
    • 1GB limit (--blocks=2048000). The OS will fail to read the boot sector if the disk is >= 1GB.
  • Atari Falcon, TOS 4.02, HDDRIVER 9.06 driver
  • Sharp X68000
    • SASI models supported. See gamesx.com for information on building a custom cable.
    • needs J3 TERMPWR jumper
    • Set to SCSI ID 3. ID0 will not work.
  • Compaq XP-1000 Professional Workstation
    • Alpha 21264 CPU, 667MHz, with a QLogic SCSI controller in a PCI slot
  • AT&T 3B2/600
  • Sun 2/120 Workstation (Unit Attention disabled)
  • Sun 4/50 workstation
  • Data General MV/2500DC running AOS/VS
    • Requires changing deviceTypeModifier to 0x4c in XML config file. Configurable deviceTypeModifier is supported from firmware v4.3.
  • Applix 1616
  • IMS MM/1
  • NeXTcube + NeXTSTEP 3.3
  • NeXTStation
    • Modified geometry settings are required to avoid "cylinder group too large" errors while formatting. Configurable geometry is supported from firmware v4.3
  • Apollo 400/425s running DOMAIN/OS
  • Motorola System V/68 R3V7 and R3V8.
    • Since the installation have information about limited number of drives(most of them with custom commands) it requires a pre-installed disk image to be dd-ed on it. Works with MVME167 and MVME177
  • Motorola System V/88 R40V4.0 through R40V4.4
  • BBC micro/Master with Akhter host adapter
  • Sun SparcStation 2 w/ Solaris 2.5.1
  • Solbourne S3000
  • TI-99/4A
  • Myarc Geneve 9640
  • SGI Indy
  • RM Nimbus
  • HP 9000/715 with HP-UX 9.X and 10.X

Samplers

  • Roland JS-30 Sampler
  • Roland W-30
  • Roland VS2480
  • Roland S-760, S-770
  • Roland XV-5080
  • Akai S950
  • Akai S1000, S2000, S3200, S3000XL, MPC 2000XL, DPS 12
    • SCSI cable reversed on S3200
    • There are compatibility problems with the Akai MPC3000. It works with the alternate Vailixi 3.5 OS with multi-sector transfers disabled.
    • MPC3000 example video
  • AKAI S5000 and S6000 with Firmware Version 2.14
  • EMU Emulator E4X with EOS 3.00b and E6400 (classic) with Eos 4.01
  • Akai DR4 and AKAI DR4VR hard disk recorder
  • EMU E6400 w/ EOS2.80f
  • EMU Emax1, Emax 2
    • E-Mu Emax video
    • Emax 2 video
    • To boot the emax you will need to use the internal scsi connection, rear db25 does not support scsi boot
    • Set SCSI2SD "Selection Delay" parameter to 1ms
  • E-mu EIIIXP, EIIIXS
  • EMU Darwin 8ch hard disk recorder
  • Emu ESI2000, ESI4000
  • Emu Esi-32
    • Works with power over 50 pin cable
  • Ensoniq ASR-X, ASR-10 (from v3.4, 2GB size limit)
  • Ensoniq EPS16+
  • Kurzweil K2000R
    • See kurzweil.com for size limits which a dependant on the OS version. Older OS versions have a 1GB limit.
    • SCSI cable reversed
  • Kurzweil K2500XS
  • Casio FZ-20M
    • Requires TERMPWR jumper. The manual shows the pin25 of the DB25 connector is "not connected".
    • May require scsi2sd-config --apple flag
  • Yamaha A5000, A3000, EX5, EX5R, RS7000
  • EMU ESI4000 [1] [2]
  • Synclavier 9600.
    • Disable Parity. Max size == 9GB.
  • Waveframe 1000
    • Max size = 16GB
  • Sequential Circuits Studio 440. [3]
    • Max size = 1GB
  • Fairlight Series -III

Other

Personal tools