Add new "blind write" option to increase write command performance. This causes issue...

[SCSI2SD-V6.git] / src / scsi2sd-util6 / BoardPanel.cc

diff --git a/src/scsi2sd-util6/BoardPanel.cc b/src/scsi2sd-util6/BoardPanel.cc
index e7a3b1901700a18390843865c5266c3ac012506d..2fc645bbbeb1eeba15a7085a36e3022e1946453d 100644 (file)
--- a/src/scsi2sd-util6/BoardPanel.cc
+++ b/src/scsi2sd-util6/BoardPanel.cc
@@ -158,6 +158,16 @@ BoardPanel::BoardPanel(wxWindow* parent, const S2S_BoardCfg& initialConfig) :
        myMapLunsCtrl->SetToolTip(_("Treat LUNS as IDs instead. Supports multiple drives on XEBEC S1410 SASI Bridge"));
        fgs->Add(myMapLunsCtrl);
 
+
+       fgs->Add(new wxStaticText(this, wxID_ANY, wxT("")));
+       myBlindWriteCtrl =
+               new wxCheckBox(
+                       this,
+                       ID_blindWriteCtrl,
+                       _("Enable Blind Writes"));
+       myBlindWriteCtrl->SetToolTip(_("Enable writing to the SD card before all the SCSI data has been received."));
+       fgs->Add(myBlindWriteCtrl);
+
        wxBoxSizer* hbox = new wxBoxSizer(wxHORIZONTAL);
        hbox->Add(fgs, 1, wxALL | wxEXPAND, 15);
        this->SetSizer(hbox);
@@ -184,6 +194,7 @@ BoardPanel::getConfig() const
                (myMapLunsCtrl->IsChecked() ? S2S_CFG_MAP_LUNS_TO_IDS : 0);
 
        config.flags6 = (myTermCtrl->IsChecked() ? S2S_CFG_ENABLE_TERMINATOR : 0);
+       config.flags6 = (myBlindWriteCtrl->IsChecked() ? S2S_CFG_ENABLE_BLIND_WRITES : 0);
 
        config.startupDelay = CtrlGetValue<unsigned int>(myStartDelayCtrl).first;
        config.selectionDelay = CtrlGetValue<unsigned int>(mySelDelayCtrl).first;
@@ -200,6 +211,7 @@ BoardPanel::setConfig(const S2S_BoardCfg& config)
        myUnitAttCtrl->SetValue(config.flags & S2S_CFG_ENABLE_UNIT_ATTENTION);
        myScsi2Ctrl->SetValue(config.flags & S2S_CFG_ENABLE_SCSI2);
        myTermCtrl->SetValue(config.flags6 & S2S_CFG_ENABLE_TERMINATOR);
+       myBlindWriteCtrl->SetValue(config.flags6 & S2S_CFG_ENABLE_BLIND_WRITES);
        mySelLatchCtrl->SetValue(config.flags & S2S_CFG_ENABLE_SEL_LATCH);
        myMapLunsCtrl->SetValue(config.flags & S2S_CFG_MAP_LUNS_TO_IDS);