SCSI2SD-V6.git
7 years agoMany bug fixes, including selection fixes.
Michael McMaster [Fri, 14 Feb 2014 20:58:27 +0000 (06:58 +1000)]
Many bug fixes, including selection fixes.
- Better selection support for SCSI1 initiators
- Support select-with-atn

7 years agoImproving PCB silk layer to indicate diode polarity.
Michael McMaster [Wed, 12 Feb 2014 09:39:51 +0000 (19:39 +1000)]
Improving PCB silk layer to indicate diode polarity.

7 years agoAdding changelog 3.1
Michael McMaster [Thu, 26 Dec 2013 22:10:57 +0000 (08:10 +1000)]
Adding changelog

7 years agoFix errors reading the last sector of SD card.
Michael McMaster [Mon, 23 Dec 2013 12:59:31 +0000 (22:59 +1000)]
Fix errors reading the last sector of SD card.

7 years agoWrite performance improvements. Doubled performance to 900kb/sec.
Michael McMaster [Mon, 23 Dec 2013 11:51:23 +0000 (21:51 +1000)]
Write performance improvements. Doubled performance to 900kb/sec.

7 years agoRemoving obsolete files.
Michael McMaster [Fri, 20 Dec 2013 11:57:03 +0000 (21:57 +1000)]
Removing obsolete files.

7 years agoRead performance improvements
Michael McMaster [Fri, 20 Dec 2013 11:54:41 +0000 (21:54 +1000)]
Read performance improvements
- More than 2x improvement in read performance, to 930KB/sec
- Added compatibility for the Keil ARM compiler.  Provides an
  additional 1.5% performance improvement.

7 years agoReliability improvements for SD init and reads. v3.0.1
Michael McMaster [Mon, 9 Dec 2013 12:00:49 +0000 (22:00 +1000)]
Reliability improvements for SD init and reads.

7 years agoAdded MODE SELECT stub to enable Apple HD SC Setup formatting. Thanks dougg3!.
Michael McMaster [Mon, 9 Dec 2013 02:16:24 +0000 (12:16 +1000)]
Added MODE SELECT stub to enable Apple HD SC Setup formatting. Thanks dougg3!.

8 years agoFix typo in scsi2sd-config Makefile for building on Mac OSX v3.0
Michael McMaster [Tue, 29 Oct 2013 23:13:55 +0000 (09:13 +1000)]
Fix typo in scsi2sd-config Makefile for building on Mac OSX

8 years agoAdded the scsi2sd-config utility, and updated firmware to suit.
Michael McMaster [Tue, 29 Oct 2013 11:48:07 +0000 (21:48 +1000)]
Added the scsi2sd-config utility, and updated firmware to suit.

8 years agoAdded Windows support for the bootloaderhost utility
Michael McMaster [Mon, 28 Oct 2013 11:08:29 +0000 (21:08 +1000)]
Added Windows support for the bootloaderhost utility
Compile on Linux using the mingw cross compiler.

8 years agoAdded Mac OSX support for the bootloaderhost utility (not tested)
Michael McMaster [Sun, 27 Oct 2013 11:35:25 +0000 (21:35 +1000)]
Added Mac OSX support for the bootloaderhost utility (not tested)

8 years agoThe bootloaderhost utility is now working under Linux.
Michael McMaster [Sun, 27 Oct 2013 11:10:54 +0000 (21:10 +1000)]
The bootloaderhost utility is now working under Linux.

8 years agoUpdated firmware for PCB Revision 3.0
Michael McMaster [Sat, 26 Oct 2013 14:21:42 +0000 (00:21 +1000)]
Updated firmware for PCB Revision 3.0
- A USB Bootloader is now used. Use either the bootloader host supplied
with PSoC Creator 3.0, or else the standalone app included with
Cypress AN73503. You have 2 seconds between connecting the USB cable
and hitting the "program" button.
- The bootloaderhost program included in this repository doesn't quite
work yet. When functional it should simplify firmware updates on Linux
and Mac OSX
- Fixed an error in the parts spreadsheet which had a 22k resistor for
USB termination instead of a 22 Ohm resistor.
- Updated parts spreadsheet with part number of PSoC actually used
(CY8C5267AXI-LP051).

8 years agoModified PSoC Creator project file to use relative paths
Michael McMaster [Thu, 24 Oct 2013 20:59:59 +0000 (06:59 +1000)]
Modified PSoC Creator project file to use relative paths

8 years agoImplemented multi-sector SD read command.
Michael McMaster [Sun, 20 Oct 2013 09:50:47 +0000 (19:50 +1000)]
Implemented multi-sector SD read command.

8 years agoSCSI data read/write implemented using the PSoC datapath
Michael McMaster [Sun, 20 Oct 2013 08:27:57 +0000 (18:27 +1000)]
SCSI data read/write implemented using the PSoC datapath
Moved some configuration parameters into EEPROM

8 years agoWrite performance improvements.
Michael McMaster [Mon, 14 Oct 2013 12:24:04 +0000 (22:24 +1000)]
Write performance improvements.
- Multi-sector SD card writes supported.
- Updated to PSoC Creator 3.0

8 years agoMulti-sector writes, increased SPI clock to 24MHz, Added support for SDHC/SDXC.
Michael McMaster [Fri, 11 Oct 2013 14:37:27 +0000 (00:37 +1000)]
Multi-sector writes, increased SPI clock to 24MHz, Added support for SDHC/SDXC.

8 years agoAdded support for standard ARM JTAG programmers, as well
Michael McMaster [Wed, 9 Oct 2013 13:02:19 +0000 (23:02 +1000)]
Added support for standard ARM JTAG programmers, as well
as continuing miniprog3 SWD support.

8 years agoExporting schematic and pcb layout to PDF
Michael McMaster [Wed, 9 Oct 2013 11:03:21 +0000 (21:03 +1000)]
Exporting schematic and pcb layout to PDF

8 years agoUpdating readme to match wiki
Michael McMaster [Wed, 9 Oct 2013 04:07:28 +0000 (14:07 +1000)]
Updating readme to match wiki

8 years agoModified gerbers to suit www.smart-prototyping.com naming conventions.
Michael McMaster [Wed, 9 Oct 2013 04:03:24 +0000 (14:03 +1000)]
Modified gerbers to suit smart-prototyping.com naming conventions.

8 years agoAdding STATUS file to indicate the pcb doesn't match the software
Michael McMaster [Thu, 3 Oct 2013 00:20:19 +0000 (10:20 +1000)]
Adding STATUS file to indicate the pcb doesn't match the software

8 years agoCreating new repository to prune history.
Michael McMaster [Wed, 2 Oct 2013 21:07:58 +0000 (07:07 +1000)]
Creating new repository to prune history.