From code/src wiki
Revision as of 09:26, 7 January 2020 by Michael (Created page with "= SCSI2SD Hardware Modifications = The information listed here is a guide only. No liability is accepted for any damage that may result in relying on this information. == Sup...")
SCSI2SD Hardware Modifications
The information listed here is a guide only. No liability is accepted for any damage that may result in relying on this information.
Supply Termination Power
The SCSI2SD V5.1 and V6 boards can be modified to supply termination power back to the SCSI cable.
SMD soldering solution
- The pins at JP201 needs to be shorted. It's designed for a standard 0.1" jumper, but you could just put a paperclip in those pin holes.
- Add a schottky diode to D205 (SOD-123 package). The diode needs to be rated for at least 1A continuous current
- Try MBRX120LF-TP
- Alternatively, desolder D203 and move it to D205.