SCSI2SD V6 Compatibility: Difference between revisions

Revision as of 08:51, 28 October 2019

This page documents the compatibility of the SCSI2SD V6 board.

These systems have been tested or reported to work with the V6 card.

Adaptec AHA2940
Amiga 3000
Apple 68k Macs
- Plus w/ v2 ROM (System 6.0.8, 7.1, 7.5)
  - SCSI Selection Delay = 0
  - Respond to Short Selectio Pulses = on
- Classic (OS 6.0.3, 6.0.7, 7.1)
- LC475 (OS 7.5.3)
- Macintosh SE (original) System 6.0.7.
- Macintosh SE FDHD System 6.0.7.
- Macintosh Duo Dock with PowerBook Duo 230 System 7.5.3.
- Macintosh Color Classic (modified with LC575 motherboard) System 7.6.1.
Apply PowerPC Macs
- Macintosh Performa 6400 MacOS 8.0.
- PowerMacintosh 9600 (modified with a G3 accelerator) MacOS 9.2.2.
- Apple Mac Performa 6100
Sega Katana Dev.Box Set 5.24 (HKT-0120) – Official development Kit for Sega Dreamcast.
NeXTStation '040 Color (NeXTSTEP 3.3)
- Tested config files
Silicon Graphics Indigo2
Silicon Graphics Indy (IP22) w/IRIX 6.5.22
Atari TT
HP3000 917SX and 957RX
Sun SPARCstation 20 running Solaris 9
- OS install requirs a small change to the install process as documented here in step #10: https://plus.google.com/+DanielBull/posts/4K5F88X5U4c

Akai S1100
Akai S3200
Akai S5000
E-mu Emax 1
EMU ESI 32
Ensoniq ASR-10
Roland S760
Roland SP-700 sample player
Fairlight Series -III
Yamaha EX5
Yamaha EX5R
Yamaha A4000/A5000
Emu e6400 Classic w/ EOS v4.62
Akai MPC3000 w/ Valixi OS 3.5 and scsi2sd firmware 6.2.1
- Works with multi-sector transfer on or off.
Akai MPC60 with v6.1.1 firmware only (Not working with later firmware)
Kurzweil K2500R and K2500RS
- Internal SCSI connector is reversed

@@ Line 8: / Line 8: @@
 * Amiga 3000
 * Apple 68k Macs
+** Plus w/ v2 ROM (System 6.0.8, 7.1, 7.5)
+*** SCSI Selection Delay = 0
+*** Respond to Short Selectio Pulses = on
 ** Classic (OS 6.0.3, 6.0.7, 7.1)
 ** LC475 (OS 7.5.3)