SCSI2SD V6 Compatibility: Difference between revisions

From code/src wiki
Jump to navigationJump to search
Newer edit →
Created page with "This page documents the compatibility of the SCSI2SD V6 board. * May not work over DB25 cables. Such systems are usually limited to 1.5MB/s SCSI transfers. Use the V5 ver..."
 
mNo edit summary
Line 2: Line 2:


* May not work over DB25 cables. Such systems are usually limited to 1.5MB/s SCSI transfers. Use the V5 version instead.
* May not work over DB25 cables. Such systems are usually limited to 1.5MB/s SCSI transfers. Use the V5 version instead.
* May require disabling the SCSI host terminator. The cause of this issue is being investigated.


== Known Issues ==
== Known Issues ==
* V6 Boards sold before May 2017 may experience constant parity issues or inability to save data with certain SCSI hosts. This is resolved by replacing the chips at U106 and U108 with a [https://www.digikey.com/products/en?keywords=1727-3988-1-ND 74AHC14]. Customers experiencing this specific issue may contact the place of purchase to resolve the problem.


{|border="1px"
== Compatible Systems ==
|Roland S760
These systems have been tested or reported to work with the V6 card.
|This sampler does not have an internal 50 pin connector, and only offers a DB25 external SCSI port.
 
* It may function if you remove the internal terminating resistors from the S760.
=== Computer Systems ===
|-
* Adaptec AHA2940
|Adaptec 2940
* Amiga 3000
|Only works with a single device on the SCSI bus with the internal host terminator disabled.
* Apple LC475
* Work is ongoing to resolve issues with this common SCSI card.
 
|-
=== Samplers ===
|Amiga 3000
* Roland S760
|No workaround currently known for older revision motherboards with soldered-in terminating resistors.
|-
|Agilent 1670* Logic Analysers
|No workaround currently known, host terminator cannot be disabled.
|}

Revision as of 11:23, 30 April 2017

This page documents the compatibility of the SCSI2SD V6 board.

  • May not work over DB25 cables. Such systems are usually limited to 1.5MB/s SCSI transfers. Use the V5 version instead.

Known Issues

  • V6 Boards sold before May 2017 may experience constant parity issues or inability to save data with certain SCSI hosts. This is resolved by replacing the chips at U106 and U108 with a 74AHC14. Customers experiencing this specific issue may contact the place of purchase to resolve the problem.

Compatible Systems

These systems have been tested or reported to work with the V6 card.

Computer Systems

  • Adaptec AHA2940
  • Amiga 3000
  • Apple LC475

Samplers

  • Roland S760
Retrieved from "https://www.codesrc.com/mediawiki/index.php?title=SCSI2SD_V6_Compatibility&oldid=457"